Overview: Program adaptions of the FDA software packages 

The following products are affected by the program adjustments: 

 LOGOSCREEN 601 / 700 FDA 21CFR PART 11 

 LOGOSCREEN 600 FDA 21CFR PART 11 

 LOGOSCREEN fd (Disclaimer 2020) 

 LOGOSCREEN es (Disclaimer 2014) 

Setup Program: LOGOSCREEN 600 / 601 / 700 (706520 / 706521 / 706530)  

FDA 21CFR PART 11 

New version:   Setup Program 323.04.xx/4.05 

Version 

Change from previous version 

323.02.xx/2.03 - Optimization of setup handling for Windows language setting: “Korean”  - Polish added as device language 

323.03.xx/3.00 - New major version 3 - Extension of the setup program with the new paperless recorder  

LOGOSCREEN 601/700 

323.03.xx/3.01 - Addition of the spanish translation - Extension of the setup program: PROFINET interface; auxiliary line function - Optimizations when opening an empty project  

323.04.xx/4.00 

323.04.xx/4.01 

323.03.xx/3.02 - French translation correction - New major version 4 - Extension of the serial interface with NMEA 0183-protocol  

LOGOSCREEN 601/700 - Integration of the new online visualisation 461.01 

323.04.xx/4.02 - Optimization data conversion 

323.04.xx/4.03 - Extension of the online data - Correction of Italian translation 

323.04.xx/4.04 - TC terminal extension in the setup programme 

323.04.xx/4.05 - general optimization 

Setup Program: LOGOSCREEN fd (706585) 

Old version: Setup Program 

187.04.xx/4.00 

New version:   Setup Program 187.04.xx/4.07 

Version 

Change from previous version 

187.04.xx/4.00 - Introduction: Horizontal recorder image, time server (SNTP),  

timeout Modbus monitoring - Extension of external analog inputs, - binary inputs and - texts - New online visualization 

187.04.xx/4.01 - Revision of time setup file - Optimization of audit trail messages 

Kommanditgesellschaft, Sitz: 36039 Fulda, Amtsgericht Fulda, HRA 302 · USt.-Id.-Nr. DE 112411234; Persönlich haftende Gesellschafterin: M.K. JUCHHEIM GmbH,  

Sitz: 36039 Fulda, Amtsgericht Fulda, HRB 17; Geschäftsführer: Dipl.-Ing. Bernhard Juchheim, Dipl.-Kfm. Michael Juchheim 

N. Hack I Produktmanagement, Stand: 28.07.2025                     

Seite: 1 /7 

187.04.xx/4.02 - Addition of the Spanish translation - Extension of the setup program: PROFINET interface; auxiliary line function - Optimizations when opening an empty project 

187.04.xx/4.03 - Adaptation of the PCS component 

187.04.xx/4.04 - Internal program optimizations 

187.04.xx/4.05 - Support of the operating systems only => Windows 7 

187.04.xx/4.06 - Optimization of the installation 

Setup Program: LOGOSCREEN es (706560) 

Old version: Setup Program 

172.02.xx/2.66 

New version:   Setup Program 172.02.xx/2.70 

Version 

Change from previous version 

172.02.xx/2.66 - General optimizations within the setup 

172.02.xx/2.67 - Internal program optimizations 

172.02.xx/2.68 - Adaption of the PCS component 

172.02.xx/2.69 - Adjustments concerning the PCS software 

172.02.xx/2.70 - Support of the operating systems only => Windows 7 

PC Evaluation Software PCA3000 (709701) 

New version:   PC Evaluation Software (PCA 3000) 

177.03.xx/3.51J 

Version Change to previous version 

3.01 - Revision of the archive switch - Improvement of the automatic reading of measurement data 

3.02 - Extension of the standard forms with CSV + Excel format - Optimization: Loading of device lists 

3.03 

3.04 - Introduction of dynamic headers when opening batches - Improved summer/winter time changeover on LS500 

3.05 - Extension of the operating systems: Windows 7 32/64 bit - internal program optimization 

3.06 

3.07 

3.08 - Extension of the device versions: mTRON T 249.01.xx - Optimization of the diagram note - Extension of the device versions: LOGOSCREEN fd/nt 187.03.xx 

3.09 - Improvement diagram note in the diagram of the form output - Update list & lable design software version 18 - Using the GUI-style on Windows 7 - Adaptation of the supported operating systems: Windows 2000 is not supported 

anymore 

3.10 - Update list & lable 18 SP3 - Extension of the device version: Integration AQUIS touch 304.01.xx 

3.11 - Improvement of the batch / group assignment for mTRON-T- System - Update list & lable 18 SP5 

3.12 - Extension of the device versions: Integration DICON touch 266.01.xx - Extension of the operating systems: Windows 8 32/64 Bit 

3.13 

3.14 - Extension of the device versions: LOGOSCREEN fd/nt 187.04.xx - Language improvement: Portuguese 

3.15 

3.16 - Extension of the device version: DICON touch 266.02.xx - Optimization of following block calculations 

Kommanditgesellschaft, Sitz: 36039 Fulda, Amtsgericht Fulda, HRA 302 · USt.-Id.-Nr. DE 112411234; Persönlich haftende Gesellschafterin: M.K. JUCHHEIM GmbH,  

Sitz: 36039 Fulda, Amtsgericht Fulda, HRB 17; Geschäftsführer: Dipl.-Ing. Bernhard Juchheim, Dipl.-Kfm. Michael Juchheim 

N. Hack I Produktmanagement, Stand: 28.07.2025                     

Seite: 2 /7 

Kommanditgesellschaft, Sitz: 36039 Fulda, Amtsgericht Fulda, HRA 302 · USt.-Id.-Nr. DE 112411234; Persönlich haftende Gesellschafterin: M.K. JUCHHEIM GmbH,  

Sitz: 36039 Fulda, Amtsgericht Fulda, HRB 17; Geschäftsführer: Dipl.-Ing. Bernhard Juchheim, Dipl.-Kfm. Michael Juchheim 

N. Hack I Produktmanagement, Stand: 28.07.2025                     Seite: 3 /7 

3.17 - Elimination of the wrong name for LS_nt form versions - Improvement of the "reset archive" function - Optimization of initialization of the audit trail database 

3.18 - Expansion: Form output with project variables - Update list & lable 20 SP1 

3.19 - Extension of the device versions: AQUIS touch 304.02.xx ; mTRON T 230.03.xx - Update list & lable 20 SP2 

3.20 - Extension of the device versions: LOGOSCREEN 600 323.01.xx - Improvement of the aggregate states of digital channels - Optimization of memory management of archives - Update list & lable 20SP7 

3.21 - Extension of the operating system: Windows 10 32/64 Bit - Optimization of the batch output within the PCA3000 

3.23 - Extension of the device versions: AQUIS touch 304.03.xx - Optimize data protection of archives with multiple configurations - Improved time zone settings when opening an archive 

3.24 - Improvement of creating standard forms 

3.26 - Extension of the device versions: mTRON T 249.04.xx 

3.27 - LOGOSCREEN 600 forms extended to include annual/total counter and report - Optimized layer setting in the output conditions 

3.28 - Improved error messages during automatic form output 

3.29 - Extension LOGOSCREEN 600: FDA 21 CFR Part 11 (Version: 323.02.xx) 

3.30 - Adaptation of the output forms LOGOSCREEN 600 (up to 160 characters batch  

  texts/comments) 

3.31 - Optimization of the PCS component 

3.33 - Optimization of the data import, - the Excel output - Improvement of filter usage mTRON T - Batch allocation - new parameters in the output form: CSV / format, date/time - Windows-based operation adjustment: only supports Windows 7/8/10 

32/64 Bit - Extension of the device versions: DICON touch 266.03.xx ; AQUIS touch 304.04.xx 

3.34 - improved behavior when opening time domains with different time zones - Optimization in menu item "Batch overview for all batches” 

3.35 - Optimizing the output of digital tracks in output forms with diagram /PDF format - Optimization of batch allocation on Logoscreen 600 - Extension of the device versions: AQUIS touch 304.05.xx - Update list & lable 22 SP6 

3.36 - Optimized batch display of the groups 

3.37 - Optimization of index files from the archive contents directory files - Using of Qt 5.11.1 - Extension of the device versions: mTRON T 249.05.xx - Extension output type SQL-Database 

3.38 - Optimization of the feature "Open batch from SQL database - Extension of the device versions: mTRON T 304.06.xx 

3.39 - Optimization of macro usage within the form output - Addition of the missing storage of the last used output form in the local evaluation 

directory 

3.40 - Notification of the new terms and conditions and supplementary clauses with reference 

  to open source software - Improvement of the output form when using the measured value reduction 

3.41 - Extension of the device versions: Logoscreen 601/700 323.03.xx - Update list & lable 24 SP4 

Kommanditgesellschaft, Sitz: 36039 Fulda, Amtsgericht Fulda, HRA 302 · USt.-Id.-Nr. DE 112411234; Persönlich haftende Gesellschafterin: M.K. JUCHHEIM GmbH,  

Sitz: 36039 Fulda, Amtsgericht Fulda, HRB 17; Geschäftsführer: Dipl.-Ing. Bernhard Juchheim, Dipl.-Kfm. Michael Juchheim 

N. Hack I Produktmanagement, Stand: 28.07.2025                     Seite: 4 /7 

3.42 - The following improvement was made to the electronic signature: 

If a time period to be signed was affected by a time zone change, the end time was 

displayed using the old time zone. This visual error has been corrected. The 

measurement data was stored in the correct time format. - Support of the new help line feature of LOGOSCREEN 601/700 - Extension of the device versions: DICON touch 266.04.xx 

3.43 - Optimization of report output in relation to diagram notes - Improvement of synchronization - Update list & lable 25SP2 

3.44 - Improvement of the filters of time domain lists - Update list & label 25 SP3 of automatic printout (Software for creating forms) - Extension of the device versions: AQUIS touch 304.07.xx  

3.45 - Update list & label 26 SP2of automatic printout (Software for creating forms) - Extension of the device versions: LOGOSCREEN 601/700 323.04.xx 

3.46 - Extension of the device versions: LOGOSCREEN 601/700 323.04.01 

3.47 - Improvement of the overrange/underrange display for float values 

3.48 - Extension of the device versions: AQUIS touch 304.08.xx 

3.49 - Time zones in calendar selection - Improvement to the shift schedule: 

In the previous version, it was not possible to set time gaps between shifts. This has 

been optimized so that now any shift times can be configured. 

3.50 - Integration of system version 09.xx of the AQUIS touch S/P - Optimization of the CSV report output: The data reduction (filtering of measurement 

data) for groups 3 and 4 has been adjusted to match groups 1 and 2, ensuring a 

consistent appearance in the output. 

3.51 Optimisation of form output for batches with signature 

PCA Communication Software PCC (709702) 

New version:   PCA Communication Software (PCC) 178.03.xx/3.51J 

Version Change from previous version 

3.01 - Introduction of automatic output 

3.02 - Improvement of configuration detection LS 500 cF 

3.03 - Optimization of device list loading 

3.04 - Improvement of multithreading - Dialog device list optimized 

3.05 - Optimization of automatic operation 

3.06 - Version adjustment according to FDA software package 

3.07 - Optimization of form output with regard to exception errors - Extension device versions: mTRON T 249.01.xx 

3.08 - Extension of device versions: LOGOSCREEN fd/nt 187.03.xx 

3.09 - Use of GUI style with Windows 7 - Adjustment of the supported operating systems: Windows 2000 is no longer supported 

3.10 - Optimization of the automatic archive change - Extension of the device version: Integration AQUIS touch 304.01.xx 

3.11 - Version adjustment according to FDA software package 

3.12 - Optimization of the „Compress connection list” tool - Improvement of service runnability in case of damaged connection list 

Kommanditgesellschaft, Sitz: 36039 Fulda, Amtsgericht Fulda, HRA 302 · USt.-Id.-Nr. DE 112411234; Persönlich haftende Gesellschafterin: M.K. JUCHHEIM GmbH,  

Sitz: 36039 Fulda, Amtsgericht Fulda, HRB 17; Geschäftsführer: Dipl.-Ing. Bernhard Juchheim, Dipl.-Kfm. Michael Juchheim 

N. Hack I Produktmanagement, Stand: 28.07.2025                     Seite: 5 /7 

3.13 - Extension of operating systems: Windows 8 32/64 Bit 

3.14 - Extension of device versions: LOGOSCREEN fd/nt 187.04.xx 

3.15 - Version adjustment according to FDA software package 

3.16 - Extension of device version: DICON touch 266.02.xx - Optimization of subsequent block calculations 

3.17 - Improvement of PCC as service - Improvement of PCC display - Improved display of logged in user in connection status - Optimization of time calculation data readout 

3.18 - Extension of the device versions: AQUIS touch 304.02.xx ; mTRON T 230.03.xx 

3.19 - Version adjustment according to FDA software package 

3.20 - Optimization of readout on change of device memory alarm 

3.21 - Extension o operating systems: Windows 10 32/64 Bit 

3.23 - Extension of device versions: AQUIS touch 304.03.xx - PCC communication between service and GUI optimized 

3.24 - Improved display of errors via “Red Bell” 

3.26 - Optimized handling of GDATA virus scanner 

3.27 - Optimized runnability in automatic mode - Improved e-mail sending with TLS 

3.28 - Improved restart behaviour when memory is too low 

3.29 - Extension LOGOSCREEN 600: FDA 21 CFR Part 11 (Version: 323.02.xx) 

3.30 - Version adjustment according to FDA software package 

3.31 - Optimization of the PCS component 

3.33 - Windows related operation adjustment: Only support of Windows 7/8/10 

32/64 Bit - Extension of device versions: DICON touch 266.03.xx ; AQUIS touch 304.04.xx 

3.34 - Reduction of installation size by dynamic MFC DLLs - Optimization of Modbus protocol transmission 

3.35 - Extension of the device versions: AQUIS touch 304.05.xx 

3.36 - Version adjustment according to FDA software package 

3.37 - Improvement of multithreading when reading PCA components - Extension of the device versions: mTRON T 304.05.xx 

3.38 - Improvement of PCC restart behaviour - Extension of the device versions:  mTRON T 304.06.xx 

3.39 - Improvement of runnability for FSecure software installations 

3.40 - Display of new general terms and conditions and supplementary clauses with reference  

  to Opensource software 

3.41 - Extension of the device versions: Logoscreen 601/700 323.03.xx 

3.42 - Extension of the device versions: DICON touch 266.04.xx 

3.43 - Version adjustment according to FDA software package 

3.44 - Extension of the device versions: AQUIS touch 304.07.xx  

3.45 - Extension of the device versions: LOGOSCREEN 601/700 323.04.xx 

3.46 - Version adjustment according to FDA software package 

3.47 - Version adjustment according to FDA software package 

3.48 - Extension of the device versions: AQUIS touch 304.08.xx 

3.49 - Version adjustment according to FDA software package 

3.50 - Improvement of e-mail dispatch - The requirements for SSL encryption in email transmission have been adjusted to 

match the server specifications, ensuring error-free email notifications. 

3.51 - Version adjustment according to FDA software package 

Kommanditgesellschaft, Sitz: 36039 Fulda, Amtsgericht Fulda, HRA 302 · USt.-Id.-Nr. DE 112411234; Persönlich haftende Gesellschafterin: M.K. JUCHHEIM GmbH,  

Sitz: 36039 Fulda, Amtsgericht Fulda, HRB 17; Geschäftsführer: Dipl.-Ing. Bernhard Juchheim, Dipl.-Kfm. Michael Juchheim 

N. Hack I Produktmanagement, Stand: 28.07.2025                     Seite: 6 /7 

PC Audit Trail Manager Software PCAT (709704) 

New version:   PC Audit Trail Software (PCAT) 175.03.xx/3.51J 

Version Change from previous version 

3.01 - Version adaptation according to FDA software package 

3.02 - Version adjustment according to FDA software package 

3.03 - Improved behaviour when loading the device list 

3.04 - Version adjustment according to FDA software package 

3.05 - Version adjustment according to FDA software package 

3.06 - Version adjustment according to FDA software package 

3.07 - Extension of device versions: mTRON T 249.01.xx 

3.08 - Extension of device versions: LOGOSCREEN fd/nt 187.03.xx 

3.09 - Use of GUI style with Windows 7 - Adaptation of the supported operating systems: Windows 2000 is no longer supported 

3.10 - Extension of the device version: Integration AQUIS touch 304.01.xx 

3.11 - Extension of the device version: Integration DICON touch 266.01.xx 

3.12 - Version adjustment according to FDA software package 

3.13 - Extension of operating systems: Windows 8 32/64 Bit 

3.14 - Version adjustment according to FDA software package 

3.15 - Extension of device versions: LOGOSCREEN fd/nt 187.04.xx 

3.16 - Extension of device version: DICON touch 266.02.xx 

3.17 - Optimized behaviour when swapping out the AT list  - Improvement when creating an AT entry 

3.18 - Extension of the device versions: AQUIS touch 304.02.xx ; mTRON T 230.03.xx 

3.19 - Version adjustment according to FDA software package 

3.20 - Version adjustment according to FDA software package 

3.21 - Integration of PCAT registry rights for Windows 10 - Extension LOGOSCREEN 600 323.01.xx 

3.23 - Extension of the device versions: AQUIS touch 304.03.xx 

3.24 - Version adjustment according to FDA software package 

3.26 - Extension of the device versions: mTRON T 304.04.xx 

3.27 - Version adaptation according to FDA software package 

3.28 - Version adaptation according to FDA software package 

3.29 - Version adaptation according to FDA software package 

3.30 - Permissions for registry entries in HKEY_LOCAL_MACHINE area adjusted 

3.31 - Optimization of the PCS component 

3.33 - Windows-related operational adjustment: only support for Windows 7/8/10 32/64 bit - Extension of device versions: DICON touch 266.03.xx ; AQUIS touch 304.04.xx 

3.34 - Reduction of installation size by dynamic MFC DLL's 

3.35 - Extension of the device versions: AQUIS touch 304.05.xx 

3.36 - Version adjustment according to FDA software package 

3.37 - Extension of device versions: mTRON T 304.05.xx 

3.38 - Extension of device versions: mTRON T 304.06.xx 

3.39 - Improvement of runnability for FSecure software installations 

3.40 - Display of new general terms and conditions and supplementary clauses with reference   

  to Opensource software     

3.41 - Extension of the device versions: Logoscreen 601/700 323.03.xx 

3.42 - Extension of the device versions: DICON touch 266.04.xx 

Kommanditgesellschaft, Sitz: 36039 Fulda, Amtsgericht Fulda, HRA 302 · USt.-Id.-Nr. DE 112411234; Persönlich haftende Gesellschafterin: M.K. JUCHHEIM GmbH,  

Sitz: 36039 Fulda, Amtsgericht Fulda, HRB 17; Geschäftsführer: Dipl.-Ing. Bernhard Juchheim, Dipl.-Kfm. Michael Juchheim 

N. Hack I Produktmanagement, Stand: 28.07.2025                     Seite: 7 /7 

3.43 - Version adjustment according to FDA software package 

3.44 - Extension of the device versions: AQUIS touch 304.07.xx  

3.45 - Extension of the device versions: LOGOSCREEN 601/700 323.04.xx 

3.46 - Version adjustment according to FDA software package 

3.47 - Version adjustment according to FDA software package 

3.48 - Extension of the device versions: AQUIS touch 304.08.xx  

3.49 - Version adjustment according to FDA software package 

3.50 - Extension of the device versions: AQUIS touch 304.09.xx 

3.51 - Version adjustment according to FDA software package 

PC Security Manager Software PCS (709703) 

New version:   PC Security Manager Software (PCS) 174.03.xx/3.51J 

Version Change from previous version 

3.01 - Version adaptation according to FDA software package 

3.02 - Version adjustment according to FDA software package 

3.03 - improved behavior when loading the device list 

3.04 - Version adjustment according to FDA software package 

3.05 - Version adjustment according to FDA software package 

3.06 - version adjustment according to FDA software package 

3.07 - Version adjustment according to FDA software package 

3.08 - Extension of device versions: LOGOSCREEN fd/nt 187.03.xx 

3.09 - Use of GUI style with Windows 7 - Adjustment of the supported operating systems: Windows 2000 is no longer  

supported 

3.10 - Version adjustment according to FDA software package 

3.11 - Version adjustment according to FDA software package 

3.12 - Version adjustment according to FDA software package 

3.13 - Version adjustment according to FDA software package 

3.14 - Version adaptation according to FDA software package 

3.15 - Extension of device versions: LOGOSCREEN fd/nt 187.04.xx 

3.16 - Version adjustment according to FDA software package 

3.17 - Error message for wrong user ID revised 

3.18 - Version adjustment according to FDA software package 

3.19 - Version adjustment according to FDA software package 

3.20 - Version adjustment according to FDA software package 

3.21 - Integration of PCAT registry rights for Windows 10 

3.23 - Version adjustment according to FDA software package 

3.24 - Version adaptation according to FDA software package 

3.26 - Version adjustment according to FDA software package 

3.27 - Version adjustment according to FDA software package 

3.28 - Version adjustment according to FDA software package 

3.29 - Version adjustment according to FDA software package 

3.30 - Permissions for registry entries in the area HKEY_LOCAL_MACHINE adapted - Extension of device versions: LOGOSCREEN 600 (FDA 21 CFR Part 11), 

323.02.xx 

3.31 - Optimization of PCS component to avoid exception errors 

3.33 - Optimization of checking new user rights on Logoscreen 600 

Internet: www.jumo.net - Functions "Comment with Authentication" & "Electronic Signature with  

time range" improved - Windows-related operational adjustment: only support for Windows 7/8/10 

32/64 bit 

3.34 - Reduction of installation size due to dynamic MFC DLL's - Version adjustment according to FDA software package 

3.35 

3.36 - Version adjustment according to FDA software package - Version adjustment according to FDA software package 

3.37 

3.38 - Improvement when creating a user for the first time - Version adjustment according to FDA software package 

3.39 

3.40 - Display of new general terms and conditions and supplementary clauses with reference   

to Opensource software 

3.41 - Version adjustment according to FDA software package - Version adjustment according to FDA software package 

3.42 

3.43 - Extension of the device versions: LOGOSCREEN 601/700 (FDA 21 CFR Part 11)   

323.03.xx 

3.44 - Version adjustment according to FDA software package - Extension of the device versions: LOGOSCREEN 601/700 323.04.xx 

3.45 

3.46 - Version adjustment according to FDA software package - Version adjustment according to FDA software package 

3.47 

3.48 - Extension of the device versions: AQUIS touch 304.08.xx  - Version adjustment according to FDA software package 

3.49 

3.50 - Version adjustment according to FDA software package - Version adjustment according to FDA software package 

3.51 

Kommanditgesellschaft, Sitz: 36039 Fulda, Amtsgericht Fulda, HRA 302 · USt.-Id.-Nr. DE 112411234; Persönlich haftende Gesellschafterin: M.K. JUCHHEIM GmbH,  

Sitz: 36039 Fulda, Amtsgericht Fulda, HRB 17; Geschäftsführer: Dipl.-Ing. Bernhard Juchheim, Dipl.-Kfm. Michael Juchheim 

N. Hack I Produktmanagement, Stand: 28.07.2025                     

Seite: 8 /7